Setting Up TBS Crossfire Module on FrSky X9D+ X9D+2019 Radio

Setting Up TBS Crossfire Module on FrSky X9D+ X9D+2019 Radio from Cyclone FPV

The steps for this are pretty simple and if you watch the video and use the links found here, you should be all set:

Links:

Steps:

  1. Update your Radio and SD Card Data
  2. Run TBS Agent and Update your Crossfire Module
  3. Turn on External Module on your Settings

That is all you need to do. Remember that when you update your module you will also need to update your receivers. This is all done wireless so you should be set. 

If you have any questions, please click here to contact me.

Share this post...
Previous post Next post