FrSky Horus X10 X10S Upgrade to ACCESS with Mod from Cyclone FPV

FrSky Horus X10 X10S Upgrade to ACCESS with Mod from Cyclone FPV

There are a few things you will need:

  • FrSky X10 / X10S Firmware download via OpenTX (see video)
  • FrSky ACCESS Mod Firmware download (click here) (see video)

There are a few things that you need to be prepared for:

  1. The internal module will upgrade the internal ISRM to ACCESS but this will not allow you to run the external module for ACCESS. You will have to downgrade your ACCESS R9M 2019 external module to ACCST if you wish to use R9M Receivers
  2. Do not select both internal and external ACCESS features when you use OpenTX. This will prevent the radio from allowing ACCST R9M Modules. 

Video Link 1:

Installation the module

Video Link 2:

Updating the firmware

 

Share this post...
Previous post Next post