Tutorials - CNC, Laser, 3D Printing

SCULPFUN S6 PRO Cutting Information

SCULPFUN S6 PRO Cutting Information from Cyclone FPV

Set work area X=405mm Y=415mm

Center = 202.5 x 207.5

Material cutting settings: (use protective plate with all cuts)

  • Paper - strength 10, speed 1000 (draw lines)
  • Paper - strength 20, speed 1000 (perforated)
  • Foam - 10mm thick - strength 25, speed 1250 (good cut no burn)
  • Balsa Style Wood - 2mm thick Strength 80 Speed 1250Ā 

Etching settings:

  • Balsa Style Wood - Strength 60, Speed 1500 (fill)