HGLRC Forward F7 Dual Gyro FC Installation Notes from Cyclone FPV
- First, I had a really hard time dealing with the quad vibrating almost uncontrollably during the bench testing. I decided to activate Gyro #2 and this seemed to have fixed it although I don't know 100%. I can tell you that I ran a 4S lipo down to 9V (stupid I know) but the motors never got hot. This was a huge improvement from the last installation and test run. Here are some of the changes I made so far and then the "Dump All" File
Commands and Changes:
- set gyro_to_use = second (this uses second gyro which in my case, seemed to correct the issue at this time)
- I am going to keep adding to this so please stay tuned.