ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester

ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV SALE
ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester - Cyclone FPV

ToolkitRC

$24.99 $27.99

Description

ToolkitRC M6 V2 150W 10A Charger, Checker, and Server Tester from Cyclone FPV

The Toolkit RC M6 V2.0 is a small 150w color screen charger! At heart, the M6 is a small and compact charger that boasts a wide array of other features not found in chargers on the market. Additional functionality includes a servo tester, battery cell checker, wattmeter (power meter), PWM/PPM/S.Bus input testers (for receiver testing), as well as output generators that offer variable voltage and amperage with DC current.

Toolkit M6 Features

  • Battery Charger
  • Cell Checker
  • Servo Tester
  • PWM,PPM, S.Bus Input/output & Receiver tester
  • Viable AMP/Volt DC Power supply (Requires external DC input)

Charger Features

  • Lithium battery cut-off voltage can be set (TVC function)
  • Measure battery voltage, internal resistance, balance
  • Measure PWM,PPM, S.Bus signal values @ 1ms accuracy
  • Output PWM, PPM, S.Bus standard signal @ 1ms accuracy
  • The customizable 1-28V constant output voltage, 1-10A constant output current
  • Multi-language optional
  • USB 2.1A@5.0V Output (Mobile device charging)
  • U-disk firmware upgrade (Slave device)

Charger

  • Input voltage: 7.0-28V
  • Type of battery: Lipo, LiHV, LiFe, Lion @ 1-6S, NiMh @ 1-16S, Pb @ 1-10S
  • Charge power: 150W / Up to 10A
  • Discharge power: Recycle Mode: 150W/ Up to 10A Normal Mode: 8W @ Up to 2A
  • USB: 2.1A @ 5.0V (Mobile Charging) or USB Firmware updating
  • Dimensions: 68x49x26mm
  • Weight: 80g
  • LCD: 1.8inch TFT RGB, 160x128 Pixel

Measurement

  • PWM: 880-2200us @ 20-400Hz
  • PPM: 880-2200us*8CH @ 20-50Hz
  • SBUS: 880-2200us*16CH @ 20-100Hz
  • Voltage: 1.0-5.0V @ 1-6S
  • IR: 10-99mR @ 1-6S

Output

  • PWM: 500-2500us @ 20-1000Hz
  • PPM: 880-2200us*8CH @ 50Hz
  • SBUS: 880-2200us*16CH @ 74Hz
  • Power: 1-10A @ 1-28V Mode:CC+CV

User Manual & Firmware

Error Codes

  • 1.over current
  • 2.overvoltage
  • 3.over temperature
  • 4.timeout
  • 5.battery is invalid
  • 6.input low
  • 7.input is too high
  • 8.balance is complete
  • 9.is not connected to the balance port
  • 10.not connected to the main port
  • 11.timeout
  • 12.types do not match
  • 13.cells error
  • 14.battery needs to be balanced
  • 15.This mode is not rechargeable
Video Tutorials and Instructions:

Ā  

You may also like...