Matek XCLASS PDB FCHUB 12S : 5V & 12V Output
Matek XCLASS PDB FCHUB 12S : 5V & 12V Output from Cyclone FPV
Designed specifically for XClass Quad. supports 8~60V DC input, 5V 5A and 12V 4A regulators, high precision current sense up to 440A range.
PDB:
- Input voltage range: 8~60V (3~12S LiPo)
- 4x70A cont, 4x110A burst
- 4x ESC power /signal/ telemetry pads
- Current Sensor: 440A, 3.3V ADC, Scale 75
- 2x LED indicators for 5V, 12V
FFC connection:
- Compatible with MATEKSYS FC F405-STD, F722-STD
- VTX: Video Transmitter signal
- T5 & R5: TX5 and RX5 of F405-STD/F722-STD
BEC 5V output (5V pad):
- Voltage: 5.0 +/- 0.1VDC
- Continuous current 5 Amps, Max.6A
- Short-circuit tolerant (2 seconds)
- Over-current protection & self-recovery
BEC 12V output (12V pad)
- Voltage: 12.0 +/- 0.2VDC (Input voltage >=12V)
- Continuous current 4 Amps, Max.5A
- Input voltage<12V, Output voltage = Input voltage
- Probably there is audible sound in the BEC12V inductor when Input voltage<12V
- Short-circuit tolerant (2 seconds)
- Over-current protection & self-recovery
Switchable 12V output (SW12V pad):
- 12V ON/OFF can be switched via PINIO
- can be use for powering VTX,LED etc.
BEC 3.3V output:
- Linear Regulator
- Continuous current: 500mA
Physical:
- Mounting: 30.5 x 30.5mm, ÎŚ3mm
- Dimensions: 55 x 50 x 6 mm
- Weight: 21g