Matek FCHUB-6S Hub Power Distribution Board 5V & 10V BEC



Matek FCHUB-6S Hub Power Distribution Board from Cyclone FPV

This PDB distribution power from from a 3-6S LiPo pack to 4 ESCs, as well as providing regulated & filtered DC 5V & DC 10V outputs for powering Cameras, RC receivers, Flight Controllers, Video Transmitters, LEDs, etc.  It also has built-in 184A current sensor and offers a FFC socket to connect the Matek flight controller conveniently.

  • Brand Name: Matek
  • Model:FCHUB-6S
  • Item Name:Power Distribution Board Built-in Current Sensor
  • Size: 36x36mm
  • 30.5x30.5mm Hole Mounting , M3
  • Weight: 8.5g
  • BEC Output: 5V & 10V

5V BEC Output:
  • Designed for RC Receivers, Flight Controllers, OSD and Servos.
  • DC/DC synchrous buck regulator
  • Voltage: 5.0V (4.9-5.1)DC
  • Current: 1.5A (Max. 2.0A 10S/minute)
  • Short-circuit tolerant ( 2 Seconds/minute)

10V BEC Output:
  • Designed for VTX or FPV Camera
  • Voltage: 10.0V (9.8-10.2) DC
  • Current: 1.5A ( Max. 2.0A 10S/minute)
  • Short-circuit tolerant ( 2 Seconds/minute)
  • 10V can be used to power cameras labeled as 12V.
  • The 3S LiPo input voltage should be 11V plus.

Current Sensor Module
  • Max. Range: 184A
  • 3.3V ADC
  • Scale the output voltage to milliamps ( 1/10th mW/A): 179

  • Total 4 pairs ESC solder tabs are fix for X Type frame
  • Max. 27V input w/ TVS protection
  • Built-in current sensor 184A
  • PDB: 4*30A ( 4*46A, 5 seconds), 4 layers*2oz copper PCB
  • BEC 5V@1.5A ( Max. 2A) w/ 100uf Panasonic POSCAP filter
  • BEC 10V@1.5A ( Max. 2A) w/ 47uf TDK MLCC filter
  • 5V&10V output LED indicators & Short circuit tolerant

Package Included:
1x FCHUB-6S PDB Board
  • 1x bag of screws