Flight Controller 6pin and 8pin Cables for FC to ESC JST-SH 1.0MM 1.25MM XH

FPV Elite

$2.50 $2.99

Flight Controller 6pin and 8pin Cables for FC to ESC JST-SH 1.0MM 1.25MM XH from Cyclone FPV

Cyclone FPV stocks thousands of JST-SH Cables so that you can replace your damaged connections or upgrade your current setup. Whether you need 2 pins, or 8 pins, or anything else in between, our large JST-SH inventory selection will be perfect to fit your setup.

Here is a sizing chart to help you out:

  • ESC Size - JST-SH 1.0MM
  • FPV Camera Size - JST-SH 1.25mm
  • LiPo Balance Lead - JST-XH

**Warning** Make sure that you pay attention to straight through vs. inverted. To tell the difference, lay the cable flat and if you see the ends (connectors) have the same configuration such as tabs on each end facing the same direction, then this cable is inverted. If you see one end with tabs and the other end if smooth (no tabs) then this is straight through. Be careful not to get the wrong one or else you will most likely fry your boards. If you have questions about this, please contact me first to discuss this. 

Common uses:

  • JST-SH 1.0MM 8 Pin - 4-in-1 ESC's
  • JST-SH 1.25MM 3Pin - FPV Cameras

Package Contents:

  • 1 x 6pin or 1 x 8 pin straight through or inverted cable

Note: Cable colors may change without notice. The colors do not matter in terms of the use of the cable.