ISDT BattGo BG-8S Smart Checker Balancer Tester
Sorry, this item is out of stock
ISDT BattGo BG-8S Smart Checker Balancer Tester from Cyclone FPV
- Working voltage: 5.0V-36V
- Input voltage: 0.8V-15V
- Input voltage 2-8S: 0.8V-4.8V
- Battery cells: 1-8S
- Voltage measurement accuracy: ±0.005V@4.2V
- Balancing cells accuracy: 〈0.005V
- Support USB charging: QC 2.0/3.0, BC1.2, Maximum output 12V/2A
- Support smart battery: Charging and discharging setting,
- read battery info and usage history.
- Supported Batt.Type: LiHv(1-8S)/LiPo(1-8S)/LiFe(1-8S)
- Display: 2.4//320x240 260,000 color IPS LCD
- Dimension: 80 x 55 x 19mm
- Weight: 59g
- Operating Temperature: 0-40°C
- Working Humidity: 10%-90%RH( noncondensing )
- Storage Temperature: -20-60°C
- Storage Humidity: 5%-90%RH( noncondensing )
Smart Battery Checker
- 260,000 color display visible under strong sunlight.
- Exquisite and powerful BG-8S smart battery checker fully support BattGO technology.
Make battery smarter
- Cooperating with BattGO technology, only with XT60i connected and you can get full knowledge on detail parameters on your batter. Easy to read cells voltage, battery circulations, working parameters, and fast set to your preferred settings.
Auto balancing cells voltage
- The advanced auto-balancing algorithm, make sure every cell is well balanced. After completion auto into low power mode.
Powerful portable charging function
- Connecting to your battery, BG-8S can become your power bank for mobile devices. Support Qualcomm QC 2.0/3.0, compatible with BC1.2 and Apple devices. Maximum output 12V/2A.
Receiver signal test and protocol analysis
- With standard 3 pin plug, BG-8S cab detect BEC output voltage. BG-8S also supports multiple protocol analyses including PWM, PPM&S.BUS and etc. With future firmware upgrades more Protocol analysis will be supported.
Multiple measurement connections
- Support XT60/XT60i, XH2.54 1-8s balance lead, XH2.54 3 pin, JST ETC to measure voltage. Support LiHv, LiPo, Lilon, LiFe, NiMh/Cd battery, and BEC output measurements.
Support USB upgrade, multilanguage options
- BG-8S has Micro USB port, easily connect to PC to perform firmware upgrades.
XT60i Meant for BattGo
- BG-8S uses the XT60i connector which was jointly developed by ISDT and Amass, support BattGO technology, and highly compatible with original XT60 plugs.
- 1x ISDT BG-8S Smart Battery Checker