Hobbywing Xrotor Micro F4-G3 Flight Controller
Hobbywing Xrotor Micro F4-G3 Flight Controller from Cyclone FPV
The Hobbywing Xrotor Micro F4-G3 Flight Controller uses the OMNIBUSF4SD firmware. This flight controller is compatible with all ESCs, as well as the Hobbywing Xrotor 60a 4-in-1 ESC, without soldering.
- Super-high Running Frequency
The STM32F405 MCU which features the powerful computing capability and super-high running frequency allows the FC to run the PID and gyro with higher frequency.
- ProShot1000, DShot 150/300/600/1200, Oneshot125, Oneshot42, MultiShot Modes Supported
Besides the latest ProShot, DShot 150/300/600/1200 mode, the FC also supports the regular PWM mode, Oneshot125 mode, Oneshot42 mode and MultiShot mode.
- TF-card Insertion Supported
Onboard OSD microchip allows users to easily adjust various
(OSD) parameters via the Betaflight/Cleanflight software.
- Onboard OSD Microchip
Onboard OSD microchip allows users to easily adjust various (OSD) parameters via the Betaflight/Cleanflight software.
- BetaFlight/Cleanflight Firmware Ready
The FC, which supports Betaflight/Cleanflight firmware & allows parameter adjustment via Betaflight /Cleanflight software, is more applicable to FPV flying & racing.
- Firmware: OMNIBUSF4SD firmware
- MCU: STM32F405
- BEC Output: 5V/ 12V
- Gyro: ICM20602 (32KHz)
- Net weight: 6g (excludes wire)
- Size: 36x36mm
- Hole Distance: 30.5x30.5mm
- 1x Hobbywing Xrotor F4-G3 Flight Controller
- 1x XT60 Pigtail
- 1 x Manual