HGLRC F4V6 Pro AIO Flight Controller
HGLRC F4V6 Pro AIO Flight Controller from Cyclone FPV
CPU: STM32F405RGT6 , dual open 8K
MPU: MPU6000-SPI connection
Built-in 5V/3A BEC output
Direct welding ESC PDB
Built-in current sensor
Black box FLASH 16M large capacity storage
Input voltage: 2-6S
Board thickness: 1.6MM
copper foil thickness: 2OZ * 8
Maximum current: 200A
FPV Transmitter: 0/25/100/200/400/600mW 48CH switchable transmitter
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
Hole mounting size: M3 30.5 * 30.5mm
Note: The antenna must be connected before power on.
Built-in BETAFLIGHT OSD to achieve remote control PID parameters
Buzzer/programming LED/voltage monitoring / BLHELI-S ESC program
Please read the cautions as follows, otherwise the stability of your flight controller cannot be ensured, your flight controller will even get damaged.
- Keep the focus on the polarity. Check carefully before connecting to the power supply.
- Cut off the power when you connect, plugin, or remove anything.
- Don't connect 5V or electrical power interfaces otherwise, your flight controller will catch fire.
- The refresh rate of PID and Gyroscope is up to 8K.
1 X Module
1 X Antenna Pigtail Cable