FrSky Apus MQ-60 V2 Micro BNF FPV Drone (Not Assembled Version)
FrSky Apus MQ-60 V2 Micro BNF FPV Drone from Cyclone FPV
NOTE** This version is recommended for students who are required to build their own drone. This version is unassembled and must be assembled by the student in order to qualify for TSA racing events. There is no soldering required. This is a plug-and-play design and requires very little time to complete. You can view the video by clicking on the Video Tutorials and Instructions tab above.Ā
If you wish to purchase the assembled version, please click here:
FPVProfessor.com build and programming video instructionsĀ are locatedĀ here
The FrSky Apus V2 brings some nice quality of life changes in their update, as well as increased motor power. The built-in FrSky XMF3EM flight controller also supports 2 methods (automatic & manual) of the binding process for all FrSky transmitters and let you have the better control. The lightweight design, measuring 66.5mm at the wheelbase and 20g of weight means itās convenient to take anywhere. The solid frame and the strong motor protection ensure youāll stay in the air in the most demanding indoor environments.
Features
- FrSky XMF3E FC (Integrated with XM receiver)
- Lightweight
- 5 minutes of flying time
- Support 2 binding modes (automatic and manual)
- Solid frame and strong blade protection
- Fly without having to adjust the parameters after binding
- Supports parameter adjustment and the default value recovery
- Specifications
- Wheelbase: 66.5mm
- Size: 84 x 84 x 58.5mm
- Weight: 20g (without battery)
- Flight controller: XMF3E (Integrated with XM receiver)
- Firmware version: betaflight_3.3.0_frsky (can be upgraded)
- Motor: Brushed 615 coreless (19000kv)
- Prop Size: 31mm, 3 bladed props
- Camera: NTSC 672X492
- Video Transmitter: 5.8GHz 26CH 25mW
- Battery: 3.7V 200mAh 25C LiPo battery
Needed To Complete:
- Video Goggles (For FPV Flying)
- Radio Transmitter
Includes:
- 1 x Apus MQ60 V2 (unassembled)
- 1 x 3.7V 200mah 25c LiPo battery
- 1 x USB charger
- 1 x Manual
Additional Items:
- Additional 1S Batteries here
- RakonHeli Props (.08 shaft 3blade)
- Gemfan Props (.08 shaf3 3blade)
- Gemfan Props (.08 shaft 3blade and 4blade)
NOTE* The FrSky RX is built into the FC and will run on any D16 Radio such as QX7, X9D+, Xlite etc.