EMAX RS2205 2600KV Red Bottom Motor - CW Thread
"Emax motors are often sold in a bundled set and all four motors can come in CW or CCW and may not arrive with two CW and to CCW. This is not a mistake but rather a decision made by the mfr. to package them this way. This does not impact the function or reliability of the motors as they locking nuts keep the props in place. I always recommend that loctite be added when using motors that are all fastened in the same direction." ~ Tarek Maalouf
Emax RS2205 Race Spec Motors (2300KV pictured below)
Introducing the Emax Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.
Cooling: The unique fins machined into the bell draw up cool air from the motor base and through the coils as the motor spools up. The faster it spins, the more air it ventilates. Cooling fins significantly reduce heat soak by at least 30%. This “cool” feature allows the RS2205 to not only have a longer lasting motor, but also harness the power of N52 magnets.
N52 Magnets: Uses the highest grade magnets. Better acceleration, stopping power, and sustained RPMs during high kv.
Bearings: Genuine Japanese NMB Bearings provide long lasting, smooth performance.
Thrust: Produces over +700g of thrust using 4S and GF4045BN.
- 1K+ Thrust with 4s battery and recommend propeller combo
- Cooling Series Bell Design reduces motor temperature by at least 30%
- Highest Grade N52 Neodymium magnets
- Genuine Japanese NMB Bearings
- Each Motor is Dynamically Balanced in the factory.
- 15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
- 3 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
- Windings made from copper of high purity
- Model: RS2205
- KV: 2600kv
- Weight: Approx. 30g with wires
- Wire AWG: 20AWG
- Stator Diameter: 22mm
- Stator Height: 5mm
- Shaft Diameter: 3mm
- Configuration: 12N14P
- Motor Diameter: 27.9mm
- Motor Height: 31.7mm
- Prop Adapter Shaft Thread: M5
- Input voltage: 3S-4S (12.6 - 16.8v)
- KV2600 With HQ4045 BN Max.thrust:763g
- EMAX CW motors have reverse threads where the CCW motors have normal CW threads.