EMAX RS2205 2300KV Red Bottom Motor - CCW Thread

EMAX

$14.99 

"Emax motors are often sold in a bundled set and all four motors can come in CW or CCW and may not arrive with two CW and to CCW. This is not a mistake but rather a decision made by the mfr. to package them this way. This does not impact the function or reliability of the motors as they locking nuts keep the props in place. I always recommend that loctite be added when using motors that are all fastened in the same direction." ~ Tarek Maalouf

EmaxRS2205Race Spec Motors (2300KV pictured below)

Introducing theEmaxRace Spec family of high performancebrushlessmotors formultirotorFPVracing. Redesigned and engineered to perform better than most in it‰ۡó»s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.

Cooling:The unique fins machined into the bell draw up cool air from the motor base and through the coils as the motor spools up. The faster it spins, the more air it ventilates. Cooling fins significantly reduce heat soak by at least 30%. This ‰ۡÌÝ̏cool‰ۡó� feature allows theRS2205to not only have a longer lasting motor, but also harness the power ofN52magnets.

N52Magnets:Uses the highest grade magnets. Better acceleration, stopping power, and sustainedRPMsduring highkv.

Bearings:Genuine JapaneseNMBBearings provide long lasting, smooth performance.

Thrust:Produces over +700gof thrust using4SandGF4045BN.

Key Features:

  • 1K+ Thrust with4sbattery and recommend propeller combo
  • Cooling Series Bell Design reduces motor temperature by at least 30%
  • Highest GradeN52Neodymium magnets
  • Genuine JapaneseNMBBearings
  • Each Motor is Dynamically Balanced in the factory.
  • 15mmExtended Prop Shaft allows virtually any prop with5mmhole.
  • 3 Lock nuts and 2 sets of motor screws for3mmand4mmthick frames.
  • Windings made from copper of high purity

Specifications:

  • Model:RS2205
  • KV:2600kv
  • Weight:Approx.30gwith wires
  • WireAWG:20AWG
  • Stator Diameter:22mm
  • Stator Height:5mm
  • Shaft Diameter:3mm
  • Configuration:12N14P
  • Motor Diameter: 27.9mm
  • Motor Height: 31.7mm
  • Prop Adapter Shaft Thread:M5
  • Input voltage:3S-4S(12.6 - 16.8v)
  • KV2600WithHQ4045BNMax.thrust:763g
  • ‰ۡÌÝÌÏEMAXCWmotors have reverse threads where theCCWmotors have normalCWthreads.