Cyclone FPV Quattro Beast HD 4 Inch Unibody Frame and Drone DIY / RTF / BNF / PNP

Cyclone FPV

$69.99 

Cyclone FPV Quattro Beast HD 4 Inch Unibody Frame and Drone DIY / RTF / BNF / PNP

This is by far the strongest frame I have ever made and the videos we have put together can prove it. Whether it is a cartwheel at full speed, a 200ft impact test, or a full-speed head-on collision with a football goal post, the Cyclone FPV Quattro Beast HD frame survived it all without any delamination, cracks, breaks, or other damage. In fact, After our final full-speed head-on collision with the football goal post, we had the aluminum screws bend to almost 45 degrees, yet the frame remained perfectly intact. Cyclone FPV has put a great deal of time and effort into the design and engineering of what we claim to be the strongest 4 Inch unibody on the market. 

Click here to watch our impact tests:

Quattro Beast Specifications:

  • Material - 3K Carbon Fiber
  • Wheelbase - 178mm
  • Motor Options - M2x12x12 (14xx,15xx)
  • FC Options - M2x20x20
  • Camera Hole Position - m2x20 (DJI Cam Fit)
  • Space Height - 20mm
  • Prop Size - 4"
  • Top Plate Thickness - 2mm 3K Carbon Fiber
  • Bottom Plate Thickness - 4mm 3K Carbon Fiber (Unibody)
  • Arm Thickness - 4mm 3K Carbon Fiber (Unibody)
  • Side Camera Mount Thickness - TPU Custom
  • Skid Plate Thickness - 3-4mm TPU Custom
  • Front Landing Plate Thickness - 3mm TPU Custom
  • Total Net Weight (frame only /without TPU) - 36g (+-1g)
  • Total Net Weight (frame with TPU additions and screws) - 60g (+-1g)

Additional Information:

Package Contents:

  • 1 x Cyclone FPV Quattro Beast HD 4 Base Frame (4mm)
  • 1 x Cyclone FPV Quattro Beast Top Mount (2mm)
  • 1 x Custom TPU Camera Mount (your color choice)
  • 2 x Custom TPU Front Landing Plates (your color choice)
  • 1 x Custom TPU Rear Skid Plate (your color choice)
  • 6 x M2 20mm Aluminum Standoffs (black)
  • 4 x M2 15mm Aluminum Standoffs (black)
  • 20 x M2 10mm Aluminum Screws (socket head)
  • 2 x M2 12mm Aluminum Screws (socket head - for use with drone skirt)
  • 10 x M2 1mm Nylon Washer
  • 1 x Cyclone FPV Kevlar Lipo Strap (black)
  • 1 x Cyclone FPV Silicone LiPo Strip

    STL Files:

    • One zip file containing all the following: (click here)
      • Front landing pads - regular
      • Front landing pads - low pro
      • Rear landing pad
      • DroneSkirt(tm) frame
      • DroneSkirt(tm) top
      • 20mm Offset Plate

    Note: I personally cut each frame to order and will not cut these ahead of time. I personally cut, wash, sand, buff, and chemically treat each frame prior to shipping. This entire process from order to shipping can take between one to two weeks so please be patient. ~ Tarek Maalouf

    Update 05/25/2021:

    There will no longer be the option to have your name cut into the remaining piece of carbon fiber. The top plate will vary between 2mm and 3mm. This has proven to be a non-issue in terms of strength testing and therefore we will use whichever is available to cut at the time of the order. Chamfered edges proved to be less effective than we initially hoped and will no longer be an option. This does mean that the DroneSkirt(tm) will be offered again. 

    Update 04/07/2021:

    The Quattro-Beast is no longer coming with the DroneSkirt(tm) since the frame will now have chamfered edges on both sides. This is effective immediately. There are now four motor holes added to each motor mount, the farthest back mounting holes have been moved 2mm towards the end of the frame and a third center mounting hole has been added so that the DJI Air Unit can now be placed flat. The top plate has been widened and a third mounting hole has been added to line up with the new middle mounting hole on the frame. 

    Update 03/01/2021:

    The Quattro-Beast no longer has 16x16 mounts.

    Update 01/14/2021:

    The Quattro-Beast 4" will now come with a standard 3mm Carbon Fiber top plate to add even more strength and durability when adding a top mount camera. All aluminum standoffs will now come in textured black. 

    Customer Reviews
    5.0 Based on 4 Reviews
    Write a Review Ask a Question
    • Reviews
    • Questions

    Thank you for submitting a review!

    Your input is very much appreciated. Share it with your friends so they can enjoy it too!

    Filter Reviews:
    KK
    04/11/2021
    Kyong K.
    United States United States
    I recommend this product
    Best quad

    This quad is the perfect blend of a tank and a butterfly if that makes any sense. It's able to take a hard hit on asphalt without a dent in the frame but it flies so amazingly smooth and stable. I honestly didn't know what to expect with such a unique frame design but you can tell ALOT of R&D was put into them because the aerodynamics are on point as well as reinforced weak points on typical frames. I was blessed to get a custom analog build and I can say without any bias, it's in the top 2 quads I own/fly on a daily basis without ever an issue (except bent/broken props because I'm a nutty pilot).

    MH
    03/17/2021
    matthew h.
    United States United States
    Must have frame

    This was such a simple frame to work with! Build platforms and options EVERYWHERE! so well thought out. It's probably the sturdiest frame you will ever have the pleasure to crash.

    AS
    12/17/2020
    Angel S.
    United States United States
    Sick work

    This is a high quality frame and the customer service is excellent

    WH
    12/14/2020
    william h.
    United States United States
    BOSS

    Clean high quality and strong highly recomend this to all!!!

    Facebook retargeting pixel