CMW 310A and 350A Solder Melting Pot 110V from Cyclone FPV
Features:
- 100% brand new, more reliable, and practical.
- Easy to use, thermal effects, tin melting fast
- Initial use in stove, the electric core of a small amount of smoke is normal
- Using high-quality stainless steel solder pot, with a high temperature, acid, abrasion resistance, non-stick tin, tin oxide surface less so; tin less, less power consumption, energy-saving, long life
- Effective insulation technology to shorten the melting of tin time, improve thermal efficiency, reduce energy consumption
- New electronic thermostat circuit design, the working temperature from 200-480°.
Specification 310A: (this is the larger unit)
- Color: as the picture shows
- Material: stainless steel
- Weight: 1092g
- Tin pan diameter: Φ100mm
- Capacity: 1200g
- Molten solder time: about 8 minutes
- Input voltage: AC220V, (AC110) 50Hz
- Power: 300W
Specification 350A: (this is the smaller unit)
- Color: as the picture shows
- Material: stainless steel
- Weight: 612g
- Tin pan diameter: 50x40mm
- Capacity: 500g
- Molten solder time: about 8 minutes
- Input voltage: AC220V, (AC110) 50Hz
- Power: 150W
Note:
- This product must be grounded. Improper installation of the grounding must be prohibited.
- Position the control dial to a high range when you start to use the solder pot and then place the dial to the grade of auto-temperature after soldering.
- The general working temperature of molten solder in the solder pot is 300-350 ℃(around grade 4-grade 9).
- The temperature of melted solder shouldn't be too high, or it will cause the aging of the solder pot, the darkening or yellowing of melted solder.
- When highly acidic scaling powder is applied, the solder pot is more likely to be corroded or perforated under extraordinarily high temperatures.
Package Contents:
- 1 x CM310A or CM350A Solder Melting Pot
- note: all cables are 110/220 cables USA and not European
