Afro 20A Slim Multi-rotor ESC (SimonK Firmware)


$4.99 $10.99

Sorry, this item is out of stock

We took the Afro and put it on a Diet!!..Developed from the ground up, we wanted to build a truly Multi-rotor specificESCthat would offer the best performance and value in the market today. We wiped the slate clean and looked to the community for inspiration and help in designing anESCthat truly could be known as ‰ۡÌÝ̏The Multi-rotorESC‰ۡó�

Enter Simon and Hamasaki AKA SimonK and timecop. This combination of hardware and firmware expertise in conjunction with the Hobbyking in house engineering team gave us the edge needed to develop anESClike no other and hence the Afro series was born.

Boasting high efficiency, all N-channel MOSFET design, jitter-free hardware PWM input, and smooth power response the AfroESCseries are set to change the expectations of multi-rotor pilots around the globe. The AfroESCseries ship with multi-rotor specific SimonK software preloaded! No need to reflash. For added convenience the Turnigy USB linker can be used via the PWM signal lead for any future software updates eliminating the need for complicated flashing jigs or the need to cut open the heat shrink.

The NEW Slim is really a 30a ESC with 2x15 amp N-MOSFET‰ۡó»s per channel x3 (same as the 30a) but was de-rated only because of the 20AWG wiring that was selected for ease of installations and to require less cooling for those tight installs, So have no worries if your set-up is on the edge.

MikroKopter I2C compatibility has also been built in as standard. A DIY port is available under the shrink wrap which allows using theESCwith MikroKopter hardware that uses I2C control.

‰ۡó¢Now Shipping with OneShot125.
Some stocks may require to flash ESC to OneShot125 via flash tool referenced in the related items

Current Draw:20A Continuous
Voltage Range:2-4sLipoly
Input Freq:1KHz
Discharge wire/plugs:20AWG/Male 2.0mm
Motor wire/plugs:20AWG/Female 2.0mm
Weight:13.7g (Included wire, plug, heat shrink)
Size:69 x 12.2 x 8.5mm

Royalties paid on each unit sold to SimonK and Hamasaki for their design work, without which the AfroESCwould never have been born, thanks guys