FlySky 8/18CH Mini Receiver With PPM iBus SBUS
Sorry, this item is out of stock
FlySky 8/18CH Mini Receiver With PPM iBus SBUS from Cyclone FPV
- DSC port: PPM/ i-BUS/S.BUS
- Channels: 8 (PPM),18 (i-BUS)
- Model type: Multi-rotor
- RF range: 2.408-2.475GHz
- Bandwidth: 500KHz
- 2.4GHz system: AFHDS 2A
- Modulation type: GFSK
- Low voltage alarm: None
- Antenna length: 26mm (Not including brass contacts)
- Power input: 4.0~8.4V
- On-line update: None
- No ground interference (Transmitting and receiving 1m from the ground): >300m
- Operating current: 40mA
- Channel delay: <15ms
- Size: 25.3mm
- Weight: 1.1g
- 1 x Mini-FlySky 8/18CH Mini Receiver
Remember, you can remove the yellow cable if you are going to use SBUS or iBUS. the yellow is for PWM. The white cable is for Sbus and iBus. Red 5V and Black Ground.
Also, if you are bound, you may not see the Receiver RX Ok! You may just see Receiver RX during binding. You will also need to long hold the bind button if you do not see stick movement in BetaFlight.
- Great Reciever
- Flysky i6X
Haven't put it in my build yet but I tested it good quality as always for FlySky.
Great Reciever for Flysky i6X/i6 Radio great packaging and fast delivery.
Great service fast delivery