HappyModel Mobula7 V2 FrSky FlySky Versions

HappyModel

$109.99 $129.99

HappyModel Mobula7 V2 from Cyclone FPV in Texas

Specification:

  • Brand Name: Happymodel
  • Model: Mobula7 V2
  • Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
  • Wheelbase: 75mm

Version: Basic Version / Standard Version ( Optional)

  • The difference between them is the package charger.
  • Basic Version: USB Charger
  • Standard Version: 6-way Charger

Crazybee F3 Pro Flight Controller

  • Item Name: Crazybee F4 Pro FC
  • MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
  • Sensor: MPU-6000(SPI connection)
  • Board size: 28.5 * 28.5MM
  • Power supply: 1-2S battery input (DC 3.5-8.7V)
  • Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
  • Built-in Receiver ( Different version having different receiver)
  • Built-in Betaflight OSD(SPI Control)
  • Built-in Current meter Max 28A
  • Current meter scale set to 1175
  • Built-in 5V 1A BEC with LC filter
  • Built-in voltage detection
  • BLHELI_S pass-through Ready
  • Heading LED Ready
  • Firmware
  • (Frsky version) CRAZYBEE F4 PRO FR Firmware target: CrazybeeF4S
  • (Flysky version) CRAZYBEE F4 PRO FS Firmware target: CrazybeeF4S

Onboard 5A 4 In 1 ESC

  • Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
  • MCU upgraded to EFM8BB21
  • Current: 5A continuous peak 6A (3 seconds)
  • Support BLHeliSuite programmable
  • Factory firmware: S_H_50_REV16_7
  • Default protocol: DSHOT600

Onboard Frsky NON-EU receiver Version SPI BUS receiver

  • Frsky D8/D16 switchable
  • Compatible Non-EU transmitter both D8 and D16 mode
  • Channels: 8ch or 16ch
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300M
Onboard Flysky receiver Version SPI BUS receiver

 

  • Protocol: AFHDS and AFHDS-2A Switchable
  • Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
  • Failsafe support
  • No ground interference ( Transmitter and receiver 1 m from the ground): 300m

SE0802 16000KV Motor 

  • KV: 16000KV; Configuration: 9N12P
  • Support 1-2S Lipo; Stator Diameter: 8mm; Stator Length: 2mm
  • Shaft Diameter: Φ1.0; Motor Dimension (Dia.*Len) : Φ10.5*14.5mm
  • Weight: 1.8g

Propeller 40mm 4-blade Propeller ( 4 CW + 4 CCW)

5.8G VTX AIO Camera

  • Output power: 25mW;Input voltage: 3.3- 5.5V;Current consumption: 300mA(type)
  • Camera resolution: 700TVL; Field of view: 120°; Video Format: NTSC
  • Antenna: RG178 antenna
  • Frequency: 5.8GHz 5bands 40 channels With Raceband
  • Smart audio ready(Frsky EU-LBT and DSMX version not compatible)
  • Size: 13.9"12.0mm ( L*W ); Weight: 3g

3.8v 250mAh Lipo Battery

  •  Notes: Need 2pcs batteries for Series circuit
  • Connector: PH2.0
  • Continuous Discharge Rate: 30C; Instantaneous discharge rate: 60C
  • Size: 55mmx12mmx7mm; Weight: 6.5g

Features:

  • 2S whoop more powerful and more flight time
  • Betaflight support, multi flight mode: ACRO/AIR/ANGLE
  • Smart audio ready, change VTX bands, channels via OSD
  • DSM2/DSMX and Frsky EU-LBT versions are Serial-based receivers, so Smart audio is not compatible.
  • Adjust the settings and the PID of the flight controller via OSD
  • Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
  • Flysky version support both AFHDS and AFHDS-2A protocol transmitter
  • DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
  • Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
  • Full telemetry function ready
  • Headlights ready
  • Camera angle adjustable
  • Real Bind and Fly version
  • Buzzer Ready

Package Included:

  • Basic Version
  • 1x Mobula7 V2 75mm FPV Drone
  • 4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
  • 4x 3.8v 250mah 30C/60C Lipo battery
  • 1x USB Lipo/LIHV Charger
  • 1x Fixing Mount for Lipo Battery
  • 1x Propeller Disassemble Tool
  • 1x Screwdriver

Standard Version:

  • 1x Mobula7 V2 75mm FPV Drone
  • 4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
  • 4x 3.8v 250mah 30C/60C Lipo battery
  • 1x 1S06 6 Way Lipo/LIHV charger
  • 1x Propeller Disassemble Tool
  • 1x Fixing Mount for Lipo Battery
  • 1x Screwdriver

Here is the VTX Table that was used in our videos below. Please make sure to right click on the file and then left click on save file as or save target as. Do not just click on it or else it will open and not download.