Cyclone FPV Quattro Mini HD 3 Inch Unibody Frame and Drone DIY / RTF / BNF / PNP

Cyclone FPV


Cyclone FPV Quattro Mini HD 3 Inch Unibody Frame and Drone DIY / RTF / BNF / PNP

Designed off the original Quattro-Beast 4" frame, the Quattro-Mini 3" brings the strength and durability of the Quattro series to a smaller 3" design. As with the Quattro-Beast 4" and the Quattro-XL5 5", the Quattro-Mini 3" utilizes the same center mounting design which makes the 3", 4", and 5" version capable of using identical components for each build. Whether you want a 3" HD featuring a DJI Air Unit or a Caddx Vista, or you wish to fly analog, the frame allows for 20x20 and mounting options throughout the base. 

Click here to watch our Quattro-Beast 4" impact tests:

Quattro Mini Specifications:

  • Material - 3K Carbon Fiber
  • Wheelbase - 178mm
  • Motor Options - M2x12x12 (14xx,15xx)
  • FC Options - M2x20x20 / m2x16x16
  • Camera Hole Position -¬†m2x20 (DJI Cam Fit)
  • Space Height - 20mm
  • Prop Size - 3"
  • Top Plate Thickness - 2mm 3K Carbon Fiber
  • Bottom Plate Thickness - 3mm 3K Carbon Fiber (Unibody)
  • Arm Thickness - 3mm 3K Carbon Fiber (Unibody)
  • Side Camera Mount Thickness - TPU Custom
  • Skid Plate Thickness - 3-4mm TPU Custom
  • Front Landing Plate Thickness - 3mm TPU Custom
  • Total Net Weight¬†(frame only /without TPU) -¬†TBA
  • Total Net Weight (frame with TPU additions and screws) -¬†TBA

Additional Information:

Package Contents:

  • 1 x Cyclone FPV Quattro-Mini HD 3" Base Frame (3mm)
  • 1 x Cyclone FPV Quattro-Mini 3" Top Mount (2mm)
  • 1 x Custom TPU Camera Mount (your color choice)
  • 2 x Custom TPU Front Landing Plates (your color choice)
  • 1 x Custom TPU Rear Skid Plate (your color choice)
  • 6 x M2 20mm Aluminum Standoffs (black)
  • 4 x M2 15mm Aluminum Standoffs¬†(black)
  • 20 x M2 10mm Aluminum Screws (socket head)
  • 2 x M2 12mm Aluminum Screws (socket head)
  • 8 x M2 1mm Nylon Washer
  • 1 x Cyclone FPV Kevlar Lipo Strap (black)
  • 1 x Cyclone FPV Silicone LiPo Strip

Additional Items:

STL Files:

  • One zip file containing all the following: (click here)
    • Front landing pads - regular
    • Front landing pads - low pro
    • Rear landing pad
    • DroneSkirt(tm) frame
    • DroneSkirt(tm) top
    • 20mm Offset Plate

Note: I personally cut each frame to order and will not cut these ahead of time. I personally cut, wash, sand, buff, and chemically treat each frame prior to shipping. This entire process from order to shipping can take between one to two weeks so please be patient. ~ Tarek Maalouf

Update 05/25/2021:

There will no longer be the option to have your name cut into the remaining piece of carbon fiber. The top plate will vary between 2mm and 3mm. This has proven to be a non-issue in terms of strength testing and therefore we will use whichever is available to cut at the time of the order. Chamfered edges proved to be less effective than we initially hoped and will no longer be an option. This does mean that the DroneSkirt(tm) will be offered again. 

Update 04/07/2021:

The Quattro-Mini is no longer coming with the DroneSkirt(tm) since the frame will now have chamfered edges on both sides. This is effective immediately. There are now four motor holes added to each motor mount, the farthest back mounting holes have been moved 2mm towards the end of the frame and a third center mounting hole has been added so that the DJI Air Unit can now be placed flat. The top plate has been widened and a third mounting hole has been added to line up with the new middle mounting hole on the frame. 

Update 03/01/2021:

The Quattro-Mini no longer has 16x16 mounts.

Update 01/17/2021:

The Quattro-Beast 3" will now come with a standard 2mm Carbon Fiber top plate to add even more strength and durability when adding a top mount camera. All aluminum standoffs will now come in textured black.