Cyclone FPV Quattro Beast HD 4 Inch Unibody Frame and Drone DIY / RTF / BNF / PNP
This is by far the strongest frame I have ever made and the videos we have put together can prove it. Whether it is a cartwheel at full speed, a 200ft impact test, or a full-speed head-on collision with a football goal post, the Cyclone FPV Quattro Beast HD frame survived it all without any delamination, cracks, breaks, or other damage. In fact, After our final full-speed head-on collision with the football goal post, we had the aluminum screws bend to almost 45 degrees, yet the frame remained perfectly intact. Cyclone FPV has put a great deal of time and effort into the design and engineering of what we claim to be the strongest 4 Inch unibody on the market.
Click here to watch our impact tests:
Quattro Beast Specifications:
- Material - 3K Carbon Fiber
- Wheelbase - 178mm
- Motor Options - M2x12x12 (14xx,15xx)
- FC Options - M2x20x20 / m2x16x16
- Camera Hole Position - m2x20 (DJI Cam Fit)
- Space Height - 20mm
- Prop Size - 4"
- Top Plate Thickness - 3mm 3K Carbon Fiber
- Bottom Plate Thickness - 4mm 3K Carbon Fiber (Unibody)
- Arm Thickness - 4mm 3K Carbon Fiber (Unibody)
- Side Camera Mount Thickness - TPU Custom
- Skid Plate Thickness - 3-4mm TPU Custom
- Front Landing Plate Thickness - 3mm TPU Custom
- Total Net Weight (frame only /without TPU) - 36g (+-1g)
- Total Net Weight (frame with TPU additions and screws) - 60g (+-1g)
Additional Information:
- Designed to fit the DJI HD Air Unit / HD Camera Combo
- Tested under severe impact conditions with perfect performance
- Can be modified to fit Caddx Vista Unit
- Considerable weight drop if build using standard stacks and vtx setup
- Motors Tested:
- Flight Controller Tested:
- ESC Tested:
- Props Tested:
Package Contents:
- 1 x Cyclone FPV Quattro Beast HD 4 Base Frame (4mm)
- 1 x Cyclone FPV Quattro Beast Top Mount (3mm)
- 1 x Custom TPU Camera Mount (your color choice)
- 2 x Custom TPU Front Landing Plates (your color choice)
- 1 x Custom TPU Rear Skid Plate (your color choice)
- 6 x M2 20mm Aluminum Standoffs (black)
- 4 x M2 15mm Aluminum Standoffs (black)
- 20 x M2 10mm Aluminum Screws (socket head)
- 2 x M2 12mm Aluminum Screws (socket head - for use with drone skirt)
- 10 x M2 1mm Nylon Washer
- 1 x Cyclone FPV Kevlar Lipo Strap (black)
- 1 x Cyclone FPV Silicone LiPo Strip
Additional Options:
- 1 x Custom TPU DroneSkirt(tm) / Frame Bumper Protector - $15.00
- 1 x Custom TPU DroneSkirt(tm) / Top Bumper Protector - $10.00
STL Files:
- One zip file containing all the following: (click here)
- Front landing pads - regular
- Front landing pads - low pro
- Rear landing pad
- DroneSkirt(tm) frame
- DroneSkirt(tm) top
- 20mm Offset Plate
Note: I personally cut each frame to order and will not cut these ahead of time. Along with your frame, you will also receive a custom name tag (limited to 6 characters) that will come from the carbon fiber sheet that I use to cut your frame. (see the video here). I personally cut, wash, sand, buff, and chemically treat each frame prior to shipping. This entire process from order to shipping can take one week so please be patient. ~ Tarek Maalouf